A sophisticated source selector or transfer switch, the ACMI enables the user to specify which AC power source is actively supplying power to the boat. 

• Six monitored, over-current protected main power inputs up to 100 Amps each
• Two outputs allow for two separate load groups with a parallel option for use with a single source 
• Reverse polarity and fault alarms, auto disconnects and lockouts 
• Physical and software lockouts between source controls 
• Supports multiple pole designs (Single, double, triple, etc.) 
• Load shedding ability 
• 110 Volt AC, 240 Volt AC, 110/220 Volt AC, 50Hz or 60Hz models 

This part number should only be used for quotation purposes.

Searching for a simplified way to network, monitor and control onboard AC circuits? The CZone AC Output Interface does it all. 

• Circuit protection, monitoring and control of AC circuits 
• Eight outputs, up to 50 Amps each 
• Status LEDs and manual bypass at the enclosure 
• Support of up to two buss feeds (2 groups, one enclosure) 
• Support of multiple pole designs (Double, triple, four pole) 
• Staggered load start up 
• IPX5 Housing 
• 110 Volt AC, 240 Volt AC, 110/220 Volt AC, 50Hz or 60Hz models

This part number should only be used for quotation purposes.

The Meter Interface (MI) accepts inputs from external AC and DC power metering sensors. 

• 3 x AC voltage inputs (multi voltage), 2 x AC current inputs 
• Calculates true RMS power 
• 3 x DC voltage inputs (multi voltage), 2 x DC current inputs 
• Calculates battery capacity as ampere hours and percentage charge remaining 
• Resolution for current metering down to 0.1 A 
• IPX5 water ingress protection 
• Outputs standard NMEA 2000 power monitoring sentences